Cleo — 13x4 HD Lace Blunt Cut Straight Bob Wig | Human Hair

A bob lives or dies on its hemline, so Cleo is cut blunt and built heavy — 180% minimum density, because a thin bob looks like a bad haircut and a dense one looks like an expensive one. The 13x4 lace still gives you a full frontal to part anywhere across the front.

Who this wig is for

The lowest-maintenance unit we sell. Short means less tangling, less product, faster drying, and a lot less money for the same lace quality. Strong pick for a first human hair wig, hot climates, and anyone tired of hair on their neck.

Full specification

Styling and heat

Flat iron the ends under to sharpen the hemline, or flick them out for a nineties finish. Trim only with shears made for hair, and cut dry — wet hair springs up and you will take off more than you meant to.

How to install Cleo

1. Put on a wig cap and cut the lace, leaving about 1mm past the hairline.
2. Cleanse your hairline, apply a thin layer of adhesive, and let it turn tacky.
3. Lay the lace down, press with a damp cloth, and secure with an elastic band for 15 minutes.
4. Lay your baby hair, part the unit, and style.

Care

• Wash every 8–10 wears with a sulphate-free shampoo, in cool water, in one direction.
• Condition the mid-lengths and ends only — never the knots at the lace.
• Air dry on a wig stand. Heat drying at the cap loosens the knots and causes shedding.
• Sleep in a satin bonnet or on a satin pillowcase.
• Store on a mannequin head, not folded in a drawer.

Shipping and returns

Free worldwide shipping on orders over $150. Dispatched within 1–2 business days; 3–5 business days to the US, UK, Canada and Australia, 5–10 days elsewhere. 30-day returns on uninstalled units in their original packaging — if the lace is not what we promised, we refund it in full.

Questions people ask before buying this one

Does it wear shorter than the length I order?

Straight hair wears its full labelled length. A 10" bob sits at 10".

What density should I choose?

200% if it is a short unit or you want it dramatic; 180% for everything else. Short cuts and blunt lines need the extra hair to hold their shape — density is what stops a bob reading thin at the ends. 180% is what most people picture when they picture a wig.

Will it fit my head?

Almost certainly. The cap is an average 22–22.5" and the straps take it from 21" to 23", which covers the large majority of adults. Measure once to be sure: a tape around your head, just above the ears and across the middle of the forehead, then round the widest part of the back. That single number is your cap size. If you land outside 21–23", email us before you order rather than after.

Do I need glue to install it?

Your choice. A 13x4 frontal covers ear to ear, so most people glue it for a flush hairline. It will also wear glueless on the band and combs if you keep the parting central and lay your own edges over the lace. The lace ships uncut — trim it against your hairline before the first wear, leaving an eighth of an inch.

Can I dye or bleach it?

Darker, yes. Lighter, take it to a colourist. Natural black human hair takes any darker shade at home without drama. Lifting it to brown or blonde means bleach, and bleach on a wig is a one-shot job — a colourist who works on units will get there without frying the ends.

How long will it last?

Twelve to eighteen months of regular wear. Straight units mostly die of heat. A heat protectant and a flat iron under 180°C will roughly double how long it stays silky.

Anything not answered here — email us, or read the size and density guide and the shrinkage chart.

Before you order

• Dispatch: 1–2 business days. Orders placed after 2pm Friday (AWST) go out Monday. Australian orders are quoted 3–5 business days standard, 1–2 express, at checkout.
• Free standard shipping over $150. This unit starts at $124, so the shorter lengths sit under the threshold — the longer ones clear it.
• 30 days to change your mind — uninstalled, lace uncut, unwashed. Cut the lace and it cannot come back, so check the fit and the colour before you trim.

Not sure on length or density? The size and density guide and the shrinkage chart answer both in about two minutes, and getting those right is what stops a return.